Model EVMG 3-18

Robust vertical multistage pumps providing high discharge heads and high efficiencies, with an in-line design requiring minimal floor space for installation.

specifications
Features
Used standard IEC motors, allowing the use of specific brand or enclosure motors if required, and ease of replacement.
Thrust bearing in models over 1.5 kW (3.0 kW for EVMG 18) for improved reliability and ease of assembly.
Installation dimensions to industry standard for easy upgrade or replacement.

Applications
Industrial
Commercial buildings
Agricultural
Original equipment manufacturers municipalities
Pressure boosting
Irrigation
Boiler feed fire fighting

Model DWO

Specifications
Stainless steel pump with open impeller
Maximum 19mm passage size
Maximum working pressure: 8 bar
Maximum liquid temperature: 40° C

Materials
Pump casing: 304 stainless steel
Impeller: 304 stainless steel
Casting cover: 304 stainless steel
Shaft: 403 stainless steel
Bracket & Motor frame: Aluminium
Mechanical seal: carbon/ceramic/NBR

Motor data
TEFC, 2 pole motor

Model 2CD

Stainless steel twin impeller centrifugal pumps. Featuring the one piece volute manufactured using Ebara’s unique plasma stamping process.

specifications
Maximum working pressure: 8bar
Maximum liquid temperature: 60° C
Materials
Materials
Pump casing: 304 stainless steel
Impeller: 304 stainless steel
Casting cover: 304 stainless steel
Diffuser: 304 stainless steel
Shaft: 304 stainless steel
Bracket & Motor shroud: 304 stainless steel
Mechanical seal: carbon/ceramic/NBR

Model 2 CDX

Stainless steel twin impeller centrifugal pumps. Featuring the one piece volute manufactured using Ebara’s unique plasma stamping process.

specifications
Maximum working pressure: 8bar
Maximum liquid temperature: 60° C
Materials
Materials
Pump casing: 304 stainless steel
Impeller: 304 stainless steel
Casting cover: 304 stainless steel
Diffuser: 304 stainless steel
Shaft: 304 stainless steel
Bracket: Aluminium (upto 1.5 kW) cast iron (2.2 Kw & above)
Motor frame: Aluminium

Model 3M & 4M

This stainless steel pumps feature a unique one piece volute casing that is produced using an advanced computer controlled plasma stamping system that ensures total quality control during manufacture. With the smooth surfaces of stamped stainless steel, this results in consistent high standard products, of superior quality and high efficiency.

specifications
Stainless steel pump with closed impeller
Maximum working pressure: 10 bar
Liquid temperature: -10° C to +110° C (standard construction)
Materials
Pump casing: 304 stainless steel
Impeller: 304 stainless steel
Casing cover: 304 stainless steel
Shaft: 304 stainless steel
Motor bracket: cast iron

Model 3LS4 4 pole

Stub shaft design
Uses IEC standard motors
Standard with high quality
Silicon carbide mechanical seal
All the hydraulic and wetted components are manufactured in 316 stainless steel
This series of stainless steel pumps feature a unique one piece volute casing that is produced using an advanced computer controlled plasma stamping system that ensures total quality control during manufacture. With the smooth surfaces of stamped stainless steel, this results in consistent high standard products, of superior quality and high efficiency. (Cast casing on 65-250 & 80 models)

specifications
Stainless steel pump with closed impeller
Maximum working pressure: 10 bar
Liquid temperature: -10° C to +110° C

Materials
Pump casing: 316 stainless steel
Impeller: 316 stainless steel
Casing cover: 316 stainless steel
Shaft: 316 stainless steel

Model 3LS

316 S/S centrifugal pumps (2 pole)

specifications
Stainless steel pump with closed impeller
Maximum working pressure: 10 bar
Liquid temperature: -10° C to +110° C
Materials
Pump casing: 316 stainless steel
Impeller: 316 stainless steel
Casing cover: 316 stainless steel
Shaft: 316 stainless steel
Motor bracket: cast iron
Mech. Seal: silicon carbide/silicon carbide/viton
Motor data
IEC standard 2 pole 50 Hz motors
Normally fitted with WEG motors

CNA Horizontal Split Case Pumps

A very compact and robust design range of pumps, suitable for many applications:

• Industrial, municipal, commercial & agricultural
• Water supply
• Hot or cold water circulation
• Irrigation
• Cooling towers
• Drainage

Materials: Cast iron casing, bronze impeller, 316 SS shaft
Shaft seal: Mechanical seal (optional gland packing)
Power used: up to 425 kW
Flow rates: 0.6 to 35 m3/min
Head: 5 to 140m
Outlet size: 100 to 350 mm

Model CMA/CMB

Single impeller centrifugal pumps manufactured in cast iron. Suitable for boosting or transfer of water, small scale irrigation, etc.

specifications
Maximum working pressure: 6 bar
Maximum liquid temperature: 40° C (CMA), 90° C (CMB)
Materials
Pump casing: cast iron
Impeller: Noryl (CMA), cast iron (CMB 1.50), Brass (CMB 2.00 – 2.20)
Shaft: AISI 416 (CMA), AISI 303 (CMB)
Bracket: Aluminum (CMA, CMB 1.50), cast iron (CMB 2.00 – 5.50)
Mechanical seal: carbon/ceramic/NBR

Technical data
TEFC, 2 pole motor
Insulation class F
IP44 protection
Single phase – 230 volt, 50 Hz, permanent split capacitor
Three phase – 230/400 volt, 50 Hz (Dual Voltage)

Model CDA

Submersible sewage pump with non-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrous matter. Suitable for sew age, waste water, storm water drainage, etc.

specifications
Maximum working pressure: 10 bar (6bar for CDA 1.00)
Maximum liquid temperature: 90° C (40° C for CDA 1.00)
Materials
Pump casing: cast iron
Impeller: brass, (Noryl for CDA 1.00)
Shaft: AISI 303, (AISI 416 for CDA 1.00)
Bracket: cast iron, (Aluminum for CDA 1.00)
Mechanical seal: carbon/ceramic/NBR
Technical data
TEFC, 2 pole motor
Insulation class F
IP44 protection
1ø, 240 volt, 50 Hz
Permanent split capacitor
Automatic thermal overload protection
Supply

Model WINNER

Submersible sewage pump with non-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrous matter. Suitable for sew age, waste water, storm water drainage, etc.

specifications
Type of liquid: clean water
Maximum liquid temperature: 35° C
Maximum sand content: 50ppm
Maximum chlorine ion density: 500ppm

Construction
Impellers: closed centrifugal, face clearance type
Bearing: sleeve type

Materials
Impellers: lxef (glass filled polyarylmide)
Intermediate casings: 304 stainless steel (AISI 304)
Diffusers: glass filled PPO (poly-phenylene oxide)
Discharge casing: cast 304 stainless steel (ASTM CF8)
Check valve: 304 stainless steel (AISI 304)
Shaft: 304 stainless steel (AISI 304)
Motor bracket: cast 304 stainless steel (ASTM CF8)
Bearing: ceramic / EPDM

Model DW VOX

Submersible pump with vortex impeller, handling up to 50 mm solids. All stainless steel construction, with double mechanical seal in oil bath.

specifications
Submersible pump with vortex impeller
Maximum solids handling 50mm
Maximum liquid temperature: 40° C
Maximum submergence: 10m
Materials
Pump casing: 304 stainless steel
Impeller: 304 stainless steel
Casting cover: 304 stainless steel
Shaft: 303 stainless steel
Seal cover: 304 stainless steel
Fasteners: 304 stainless steel

Model best 2-5

Submersible pump with open impeller, handing up to 10mm solids. All stainless steel construction, with double mechanical seal in oil bath..

specifications
Submersible pump with open impeller
Maximum solids handling 10mm
Maximum liquid temperature: 50° C
Maximum submergence: 10m

Materials
Pump casing: 304 stainless steel
Impeller: 304 stainless steel
Casting cover: 304 stainless steel
Shaft: 303 stainless steel
Seal cover: 304 stainless steel

QDC Models

Optional quick discharge connectors (QDC) are available to suit all of the Ebara D’ series submersible pumps.

The QDC allows for the easy removal and replacement of the pumps for maintenance purposes without having to enter the sump.
.

Model DVS

Simi vortex impeller design provides non clog operation, suitable for waste water applications that contain soft or fibrous solids:-
Septic effluent, textile & woolen mills, food processing plants, dairy & piggery wash down, etc

specifications
Submersible pump with semi-open impeller
Maximum solids handling: 50 ø models – 32mm
80ø 0.75, 1.5kW – 45mm
80ø 2.2, 3.7kW – 56mm
Maximum liquid temperature: 40° C
Maximum submergence: 0.4 – 1.5 kW – 4m
2.2 – 3.7 kW – 8m
Materials
Pump casing: cast iron
Impeller: cast iron

Model DML

Single channel impeller – 76mm passage

Submersible sewage pumps with single channel non-clog impellers and double row lower bearings for reliability. Suitable for raw sewage, waste water, storm water, etc.

specifications
Submersible sewage pump with non-clog, semi-open impeller
Maximum solids handling: 76mm
Maximum liquid temperature: 40° C
Maximum submergence: 8m
Materials
Pump casing: cast iron
Impeller: cast iron
Suction cover: cast iron
Shaft: 403 stainless steel

Matrix Multistage Pumps

Matrix_Multistage_Pumps

Submersible sewage pump with non-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrous matter. Suitable for sew age, waste water, storm water drainage, etc.

specifications
• High pressure
• Compact design
• Quiet and efficient

JESX & JEX Jet Pumps

JESX_JEX

specifications
• Jet pumps
• Jet & venture assisted
• Ideal for suction lift
• Automatic controllers
• Quality European presscontrol
• Anti-cycling – no pressure fluctuations
• need for a pressure tank
• Run dry protection
• Easy installation – no adjustments necessary
• Pressure switch & tank
• Traditional systems with pressure switch, pressure gauge and chrome plated 5 ways tee.
• Steel tanks with stainless steel pipe connection

Model DF

Model_DF

Submersible sewage pump with non-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrous matter. Suitable for sew age, waste water, storm water drainage, etc.

specifications
Submersible sewage pump with non-clog, semi-open impeller
Maximum solids handling: 65 ø models – 40mm
80ø models – 46mm
Maximum liquid temperature: 40° C
Maximum submergence: 8m
Materials
Pump casing: cast iron
Impeller: cast iron
Suction cover: cast iron