DVS

Pressure: 25 meters of head
Flowrate: 1000 l/min

 

 

 

Semi vortex impeller design provides non clog operation, suitable for waste water applications that contain soft or fibrous solids: Septic effluent, textile & woolen mills, food processing plants, dairy & piggery wash down, etc.

 

 

 

 

 

 

 


Specifications

  • Submersible pump with semi-open impeller
  • Maximum liquid temperature: 40° C
    Maximum submergence: 0.4 – 1.5 kW – 4m
    2.2 – 3.7 kW – 8m

Maximum solids handling: 50 ø models – 32mm

  • 80ø 0.75, 1.5kW – 45mm
  • 80ø 2.2, 3.7kW – 56mm

Materials

  • Pump casing: cast iron
  • Impeller: cast iron
  • Suction cover: cast iron
  • Shaft: 403 stainless steel
  • Motor frame: cast iron
  • Fasteners: 304 stainless steel
  • Mechanical seal: double mechanical seal in oil lubricated chamber, silicon carbide lower faces, carbon/ceramic upper faces.

Motor data

  • Air filled, dry submersible, 2 pole motor
  • Insulation class F.
  • IP*8 protection
  • 1 phase, 240 volt, 50 Hz (0.4 & 0.75 kW only)
  • Or
  • 3 phase, 415 volt, 50 Hz (0.75 to 3.7 kW)
  • In built overload protection
  • Manual or automatic versions available for all models
  • Cable: 6m (0.4 to 1.5 kW) 10m (2.2 & 3.7kW)
  • Screwed companion flange (50mm models)
This entry was posted in Submerisble Range. Bookmark the permalink.