EVMG

Flows to 400 l/min
Heads to 275 meters or 25 bar

304SS Multistage pump

Stainless steel pump with open impeller, capable of passing 19mm solids

 

Specifications

  • Maximum working pressure: 16 to 25 bar, depending on model. Refer to performance table
  • Maximum liquid temperature: -15° C to +120° C
  • Maximum solid content: 50 ppm (size 0.1 to 0.25mm or less)
  • Maximum chlorine ion density: 500 ppm
  • Closed centrifugal impellers
  • In built thrust bearing with models above 1.5 kW (above 3.0 kW for EVMG 18)

Materials

  • Impeller: 304 stainless steel
  • Intermediate casing: 304 stainless steel
  • Outer casing: 304 stainless steel
  • Bottom casing: cast iron
  • Top casing: cast iron
  • Shaft: 304 stainless steel
  • Motor bracket: cast iron
  • Mechanical seal: carbon/ceramic/NBR
  • Liner rings: EPDM & 304 SS
  • O’ Rings: EPDM

Motor data

  • Used IEC standard motors, face or flange mount depending on model. See dimension table for details
  • Standard
  • 3 phase, TEFC, 2 pole motors, Class F, IP55
  • Optional
  • Single phase motors (up to 7.5 kW)
  • Special enclosure or specific brand on request
  • 0.37 to 15 kW – 3 phase

Connections
16 bar oval flange with screwed companion flange
Or
25 bar DIN round flange

This entry was posted in Centrigugal Range. Bookmark the permalink.