  |
 |
||||||||
 |
 |
|
|
||||||
 |
 |
|
|
||||||
 |
 |
|
|
||||||
 |
 |
|
|
||||||
 |
|
||||||||
|
|
|
|
|
|
|
|
|
|
FERTILIIER INJECTION PUMPS
| Features: POSITIVE DISPLACEMENT - REPEATABLE FLOW VARIOUS MATERIALS OF CONSTRUCTION CAN RUN DRY WITHOUT DAMAGE SELF PRIMING SEALLESS Models: |
Accessories: Variable Speed Drive Controls Tank Mixing Educator Nozzles Line Filters |
 |
 |
Hydra-Fert The pump unit that
is simply built to last can provide cost effective solutions to injecting and metering of
fertilizers and chemicals.
Where accurate metering of low to high volume liquids is required the Hydra-Fert
pump unit can achieve this task. Corrosive and ahrasive solutions are not a problem.
The heart of the Hydra-Fert unit is the Hydra-Cell pump, this
industrial quality pump is capable of delivering a repeatahle flow 24 hours a day which
makes it suitable for the most demanding injection applications.
The Hydra-Fert unit can be supplied in various drive options, 240v, 415v and
bare shaft for V-belt drive. They can be fully automated with existing irrigation
controllers.
The versatility of the Hydra-Cell pump is such that other tough agricultural
applications including Insecticide, Fungicide and Herbicide spraying can be undertaken by
this pump. Because it has a maximum pressure capability of 70 bar ( 1000 psi) other
applications such as High Pressure Cleaning, High Pressure Fire Fighting and Powering High
Pressure Fogger Systems can also be achieved.
| VARIABLE SPEED DRIVE CONTROLS The Hydra-Fert unit can be supplied with a frequency inverter. This will accept a signal from a flow meter to ramp the motor speed up and down so that a desired injection rate is achieved. These controls can also be programmed with predetermined rates.
|
|
| TANK MIXING EDUCTOR NOZZLES Eductor Principles: Eductors use a unique venturi design which enables smaller pumps to circulate large volumes of tank solution. The eductor will circulate four to five litres of solution for each litre pumped. Eductors are used for mixing chemicals, suspending solids, adjusting pH, "sweeping" debris or sludge toward a filter intake and many other useful applications. Standard material is glass filled polypropylene.
|
 |
| LINE FILTERS Line filters: 1-1/4" and 1-1/2" BSP threads, max. working pressure 15 bar, filtering capacity 200-280 1/min, cartridge Æ 58x210mm, fixing points on both sides, poly-propylene body, EPDM gaskets. >> Click for diagram (34KB) Self-cleaning line filters:
|
|