Model CDA

Submersible sewage pump with non-clog semi open impeller, with “cutting effect”, to prevent clogging by fibrous matter. Suitable for sew age, waste water, storm water drainage, etc.

specifications
Maximum working pressure: 10 bar (6bar for CDA 1.00)
Maximum liquid temperature: 90° C (40° C for CDA 1.00)
Materials
Pump casing: cast iron
Impeller: brass, (Noryl for CDA 1.00)
Shaft: AISI 303, (AISI 416 for CDA 1.00)
Bracket: cast iron, (Aluminum for CDA 1.00)
Mechanical seal: carbon/ceramic/NBR
Technical data
TEFC, 2 pole motor
Insulation class F
IP44 protection
1ø, 240 volt, 50 Hz
Permanent split capacitor
Automatic thermal overload protection
Supply

This entry was posted in EBARA PUMPS. Bookmark the permalink.