|
Accessories Accumulator
Tank
Heat Sink
Twist-on Water Strainer
Tank Pressure Switch
Feed Water Control Valve with Harness
 |
Accumulator
Tank
| Model |
Description |
| 181-201 |
24 ounce total capacity (liquid and air),
pre-pressurized to 1.8 bar (20 psi), 0 to 6.9 bar (100 psi) range of adjustment),
Santoprene bladder, mounting bracket. ½” (F) ports, NSF approved |
|
 |
Heat Sink
| Model |
Description |
| 34-007 |
12.7 cm Heat Sink to assist cooling
in continuous-duty applications. |
| 34-006 |
7.6 cm Heat Sink to assist cooling
in continuous-duty applications. |
|
 |
Twist-on Water
Strainer
| Model |
Description |
| 170-060-00 |
316 ss, 50 mesh screen, ½” [12 mm]
Barb inlet, EPDM O-ring. |
| 170-061-00 |
316 ss, 50 mesh screen, ½” [12 mm]
Pipe inlet, EPDM O-ring. |
| 170-061-04 |
316 ss, 50 mesh screen, ½” [12 mm]
Pipe inlet, Buna O-ring. |
Additional fitting P/N 8-145-01 needed for use with 8000
Series pumps with 3/8” NPT-Female.
|
 |
Tank Pressure Switch
| Model |
Description |
Operating Pressure |
Ports |
| 94-090-01 |
Tank Pressure Switch with Wire Harness and
Fittings |
Shut off at 40 PSI |
¼” JG |
|
WIRE LENGTH: 2Ft |
Turn off at 25 PSI |
|
|
|
|
|
| 94-080-01 |
Low Pressure Switch with Wire Harness and
Fittings |
Shut off at 3 PSI |
¼” JG |
|
The wire is connected to normally open
leads. |
Turn on at 8 PSI |
|
|
WIRE LENGTH: 2 Ft |
|
|
|
 |
Feed
Water Control Valve with Harness
| Model |
Description |
Ports Size |
Voltage |
Freq. |
| 94-091-00 |
Feed Water Control Valve with Wire
Harness
Used in combination with tank and pressure switch.
It automatically closes the feed-water when the water tank after R.O. is full |
¼” JG |
24 VAC |
50/60 HZ |
|
CURRENT: 200 mA holding
current
VALVE POSITION: Normally closed. |
|
|
|
|
|
|
>> Back to Pump Systems Index
|
